Function Description
Container gantry cranes are mainly used for container loading, unloading, handling, and stacking in container railway turning yards and large container storage and transportation yards. In terms of time, they are mainly put into operation in container hub ports, using non cantilever, single cantilever, or double cantilever methods, which are determined based on the site, container storage and transportation process flow, and loading and unloading vehicles (container trucks or railway vehicles).
The container gantry crane not only requires the addition of tracks in the container yard, but also outperforms the tire type container gantry crane in terms of container height, container positioning accuracy control, anti roll performance, and steel structure stress state. Due to the use of track type, it can withstand greater loads by increasing the number of wheels. Therefore, the track type container gantry crane has a large span and high site utilization rate. In the middle of the span, 8-15 containers are generally stacked with one or more lanes. Due to the use of power cables, the power output is stable, there is no exhaust emissions, low noise, good environmental performance, good positioning ability, and can provide a fast and effective container storage and retrieval system, making it easy to achieve yard automation, If combined with automatic handling vehicles or box moving transport machines, high operational efficiency can be achieved, resulting in higher operating speed and efficiency of the machinery.
The container gantry crane adopts a double cantilever structure and is used for loading and unloading operations at the container terminal. The crane can move longitudinally, horizontally, and autonomously, and can handle container operations up to 20.40 standard
| 加高连体集装箱吊机 double container crane |
| 性能参数 specifications |
| 1 | 型号 model number |
| BSLD300 | BSLD360 | BSLD400 |
| 2 | 自重 total weight | T | 10.5 | 10.8 | 11.6 |
| 3 | 额定起重量 rated capacity | T | 30 | 36 | 40 |
| 4 | 最大行驶速度（空载）max.steering speed (without load) | Km/h | 3.5 | 3.5 | 3.5 |
| 5 | 最小通道宽度 min.passageway widty | mm | 5400 | 5400 | 5400 |
| 6 | 液压马达额定扭矩 rated torque of hydraulic motor | Nm | 1616 | 1616 | 1616 |
| 7 | 最大提升速度 max.lifting speed | 空载 without load | mm/s | 35 | 35 | 35 |
| 8 | 最大下降速度 max.falling speed | mm/s | 25 | 25 | 25 |
| 9 | 最大提升速度 max.lifting speed | 满载 with load | mm/s | 25 | 25 | 25 |
| 10 | 最大下降速度 max.falling speed | mm/s | 30 | 30 | 30 |
| 11 | 发动机功率 engine power | Kw | 45 | 45 | 45 |
| 12 | 系统压力 system pressure | Mpa | 16 | 16 | 16 |
| 13 | 转向轮旋转角度 rotation angle of turning wheel | 。 | 110 | 110 | 110 |
| 结构参数 specifications of structure |
|
|
|
|
|
| 14 | 长X宽X高 L*W*H | mm | 6891×5133×8850 |
| 15 | 吊梁最大离地高度 max.height of lifting beam | mm | 5660 | 5660 | 5660 |
| 16 | 吊梁最低离地高度 lowest height of lifting beam | mm | 2270 | 2270 | 2270 |
| 17 | 最小离地间隙 The minimum ground clearance | mm | 110 | 110 | 110 |
| 18 | 纵向轮距 Longitudinal track | mm | 6782 | 6782 | 6782 |
| 19 | 横向轮距 crosswise tread | mm | 3648 | 3648 | 3648 |
| 20 | 横向内宽 inside width of crosswise | mm | 3325 | 3325 | 3325 |
| 21 | 钢丝绳直径 Wire rope diameter | mm | 28 | 28 | 28 |
| 22 | 轮胎规格 Tire size | mm | Φ560×255 | Φ560×255 | Φ560×255 |
Company production：
Shanghai Gather Power Industry Co., Ltd was established in 2003 in Fengxian District, Shanghai, China, has two Joint-stock manufacturing factory. GP currently have more than 800 staffs, among whom 40% are university staff, including 60 engineers and technical researchers. Most of the 60 technicians have many years experience in forklift manufacturing industry, with rich experience and comprehensive technology, they served as a Chief Engineer or Assistant Chief Engineer in well-known forklift manufacturing enterprises.The company has invested 10 million USD dollars in construction of the factory.
English
